Trane Air Duct Cleaning Service Nationwide

Why Fort Lauderdale Homeowners Choose Trane Air Duct Cleaning

We clean and service the ductwork connected to Trane systems all over Fort Lauderdale Trane service areas, from XR14 split systems in Coral Ridge to RunTru packaged units in Victoria Park. As an independent Trane service provider, we’re not tied to a manufacturer’s script. When we open a Trane air handler here, we already know what the salt air and humidity have likely done to the coil, the blower, and the plenum before we unbolt the first panel. That’s the difference between a crew that swaps a filter and a crew that fixes why air isn’t moving. Call (754) 354-3644 and we’ll give you a written price before any work starts.

Call (754) 354-3644

Why Trust Hollis Air Duct Fort Lauderdale for Your Trane Air Duct Cleaning?

We’ve worked on enough Trane units in Fort Lauderdale to know their quirks. The older XL and XR series air handlers, the newer Hyperion cabinets, the RunTru packaged units. They’re well-built machines, but their high static pressure filtration and tight cabinet design mean the ductwork isn’t a separate thing you can ignore. It’s part of the system. If the ducts are fouled, the coil suffers. If the coil is fouled, the blower works harder. A Trane unit in a coastal home with dirty ducts is like a runner breathing through a straw.

Roy Castellanos, owner of Hollis Air Duct Fort Lauderdale, spent years doing Air Duct Cleaning and HVAC work across South Florida before starting this shop. He’s seen Trane air handlers packed with construction dust in mid-rise condos near the Intracoastal and flex duct in 1950s ranch homes that’s never been opened since the original install. His crew cleans systems near Las Olas Boulevard and commercial buildings over by Port Everglades. Roy’s approach is straight: if your Trane needs duct cleaning, he’ll tell you. If it needs a coil treatment instead, he’ll tell you that, too.

We clean and service Trane ductwork with the same discipline we bring to every job. Written price first. Background-checked, uniformed technicians. A 365-Day Done Right Promise in writing: if it’s not done right, we come back and make it right at no charge. That promise covers the full year, not thirty days.

Common Trane Air Duct Cleaning Problems We Fix in Fort Lauderdale

These are the issues we see repeatedly on Trane systems in Fort Lauderdale. If any of these sound familiar, the fix usually starts with cleaning what’s moving the air.

• Delaminated fiberglass ductboard in older supply plenums. Trane systems from the 1980s and 1990s often used fiberglass ductboard for supply plenums. In Fort Lauderdale’s humidity, the facing breaks down and loose glass fibers get pulled into the airstream. Those fibers foul the evaporator coil and end up in your supply registers. We remove the loose material, seal the plenum seams with mastic, and clean the coil so the fibers don’t just re-enter the system.
• Clogged evaporator coils on XR14 and XR16 units. Trane’s high-efficiency coils have tightly spaced fins. Drywall dust, pet hair, and lint pack into those fins faster than you’d expect. When the coil blocks airflow, the system can’t move enough air across the coil, and the coil freezes. A frozen coil is often misdiagnosed as a refrigerant problem. In coastal Fort Lauderdale homes, it’s usually a dirt problem.
• Variable-speed blower wheels caked with grease and lint. Trane’s TAM9 and similar variable-speed air handlers spin the blower wheel at different speeds depending on demand. When the wheel is caked with greasy lint, it rotates out of balance. You’ll hear a bearing whine or a low rumble. The fix is removing the blower assembly and cleaning the wheel with a coil-safe degreaser, then cleaning the surrounding cabinet so the wheel stays balanced.
• Sagging or clogged condensate pans spreading mold into the return. Trane air handlers in Fort Lauderdale condos and older homes often have condensate pans that sag or clog. That standing water seeds mold, and because the return plenum is right there, the mold spreads into the flex duct collar and then through the entire return side. Cleaning the ducts without addressing the pan means the smell comes back within weeks.
• Rust flakes blowing from registers on S9V2 furnace systems. We see this on Trane S9V2 gas furnaces in Fort Lauderdale homes where the ductwork is older galvanized steel. The combination of high indoor humidity, salt air, and condensate from the A-coil causes the metal to rust from the inside. When a previous cleaning was rushed, the rust flakes loosen and blow into the living space. A proper cleaning includes removing the loose scale and sealing accessible seams so the flaking stops.

Trane Parts & Our Repair-vs-Replace Approach

We use OEM-equivalent Trane filters, gaskets, and access panel seals when they’re available. But we’re honest about the rest: Trane ductwork, dampers, and flex are standardized components. Quality aftermarket replacements from a local sheet metal shop or duct supplier work just as well and don’t compromise Trane’s CFM ratings. We won’t push a marked-up “genuine” part when a correctly matched aftermarket component does the same job for less.

Here’s how we decide repair versus replace. If a Trane air handler’s coil is heavily impacted with construction dust or fiberglass, we recommend cleaning first. A coil treatment can restore airflow and drop static pressure dramatically. We will not sell you a full duct package without first addressing the blower and the coil. That’s backwards. If the ductwork itself is collapsed, torn, or so deteriorated that cleaning won’t hold, we’ll tell you and show you photos. Then you decide with a written price in hand. Call (754) 354-3644 to talk through what your Trane actually needs.

Our Trane Service Process – Step by Step

1. 1
   Diagnosis. We measure static pressure, check the blower wheel and coil, and inspect the plenum and return side. For Trane variable-speed units, we run the system through its speed settings before opening anything, so we know what “normal” is for your specific air handler.
2. 2
   Cleaning and repair. We run a negative-air full system cleaning with the coil and blower cleaned first, not last. Duct sealing with mastic is done at the plenum and accessible joints to stop re-contamination. For air handler cleaning, we pull the blower assembly and clean it with a coil-safe degreaser.
3. 3
   Test. After cleaning, we re-measure static pressure and airflow. On one Trane TAM7 in Coral Ridge, static pressure dropped from 0.9 to 0.5 iwc after a full cleaning and plenum sealing. That’s the number we want to show you.
4. 4
   Warranty in writing. Every job gets the 365-Day Done Right Promise. If something fails within a year, we return at no charge. That includes a free second visit if the repair doesn’t hold.

Trane Products We Service & Install in Fort Lauderdale

We service ductwork connected to the full range of Trane residential equipment in Fort Lauderdale: XR14 and XR16 split systems, XL18i heat pumps and air handlers, RunTru by Trane packaged units, and S9V2 gas furnaces with A-coils. We also provide Trane service in Pompano Beach for the same equipment lines. We also clean the ducting for Trane CleanEffects whole-home air cleaners, including the pre-filter housing and collection cells where debris accumulates. Our crews keep the common filters, gaskets, and sealants stocked locally so most Trane jobs don’t wait on parts.

We Also Service These Brands

Most Fort Lauderdale homes run a mix. We clean and service ductwork connected to Lennox and Carrier systems as well. The process is the same: written price, clean work, a year of coverage in writing. We’re not tied to one manufacturer, which means we can tell you what your specific system needs without a brand agenda.

FAQs – Trane Air Duct Cleaning Service in Fort Lauderdale

Does my Trane air handler’s variable-speed blower require different duct cleaning than a single-speed unit?
Yes. A variable-speed blower, like the one in Trane’s TAM9, ramps through multiple speeds and often runs continuously at low speed for air circulation. That constant low-speed operation pulls dust into the return side differently than a single-speed unit. The blower wheel and the cabinet around it need to be cleaned, not just the ducts. If you skip the wheel, the imbalance and whine come back. Call (754) 354-3644 for a written quote.

I have a Trane CleanEffects whole-home air cleaner. Will duct cleaning remove the accumulated debris from its pre-filter housing?
Yes, a proper cleaning includes the pre-filter housing and collection cells. Trane CleanEffects units trap fine particles with an electric charge, and the pre-filter housing collects a surprising amount of lint and dust. If the cleaner itself is dirty, it creates extra static pressure and the filter’s effectiveness drops. We clean the housing and cells as part of the system cleaning, not as a separate charge.

Our Trane XR16 coil froze last summer. Is that a sign our ducts are dirty?
Often, yes. A frozen coil means airflow across the coil dropped too low. In Fort Lauderdale homes, the most common cause is a dirty coil or clogged return ducts, not a refrigerant leak. If the coil is clean and the ducts are clear, then we look at refrigerant. But nine times out of ten in this market, the freeze is a dirt and airflow problem. Getting a static pressure reading tells us which it is in about ten minutes.

Can you clean the insulation inside my Trane supply plenum without damaging the duct?
Yes, but it depends on the plenum’s condition. If the fiberglass lining is intact and just dusty, we vacuum it with a negative-air machine and seal the seams. If the lining is delaminating and shedding fibers into the airstream, cleaning alone won’t solve it. In that case, we recommend sealing the exposed surfaces with mastic or replacing the plenum section. We’ll show you photos so you can see what we’re seeing.

Why does my Trane S9V2 furnace blow rust flakes from the registers after the ducts were supposedly cleaned?
Because the previous cleaning didn’t remove the loose rust inside the ducts, or they sealed over it without cleaning first. Rust flakes come from galvanized steel ductwork that’s been corroding from the inside, usually at the seams or where condensate sat. A rushed cleaning loosens the flakes, and then they blow into the rooms. The fix is a low-contact cleaning that removes the loose scale, followed by sealing accessible seams to stop further deterioration. Call (754) 354-3644 for an exact quote on your system.

How much does Trane air duct cleaning cost in Fort Lauderdale?
Most full-system cleanings for a Trane-equipped home in Fort Lauderdale run between $450 and $900, depending on home size and how many supply runs are involved. A single air handler cleaning with coil and blower typically adds $150 to $300. A duct sealing job with mastic runs $400 to $1,000 depending on the number of accessible seams and plenum sections. Those are honest whole-system ranges, not per-vent teaser prices. We write the price down before any work starts and it does not move at the door. Call (754) 354-3644 for a free estimate on your specific system.

Written by Roy Castellanos, Owner at Hollis Air Duct Fort Lauderdale, serving Fort Lauderdale since 2004. Clean ducts move air. Everything else is just noise.