Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Trane Air Duct Cleaning in Plantation, FL | Hollis Air Duct Fort Lauderdale
We’re an independent Trane service provider offering Air Duct Cleaning in Plantation and sealing ductwork across the city, and the short answer is this: most Trane systems in this city need more than a standard cleaning. They need someone who understands how 1970s duct layouts, slab foundations, and Florida humidity work together to clog returns and breed mold inside air handlers. Roy Castellanos and our crew at Hollis Air Duct Fort Lauderdale handle Trane equipment daily without any manufacturer tie, which means we tell you what your system actually needs, not what pads an invoice. Call (754) 354-3644 for a straight answer and a written price before any work starts.
Why Plantation Residents Choose Us for Trane Service
We’ve spent years working on Trane systems across Broward County, and Plantation’s housing stock keeps us honest. The city is full of single-story ranches built between the 1950s and 1980s, many with original galvanized ductwork that’s been pulling humid air for four or five decades. Roy Castellanos picked up his trade fundamentals at Los Angeles Trade-Technical College and has been doing HVAC and air duct work across South Florida for close to two decades. He’ll tell you straight: a Trane XL14 running in a 1978 Plantation ranch behaves differently than the same unit in a newer Sunrise townhome.
We’re an independent shop, not a Trane dealer. That matters because we’re free to recommend the right fix, whether that’s an OEM part you insist on or an epoxy-coated flex section that will outlast the original in Plantation’s humidity. Our Trane sales & service knowledge covers the full residential and light commercial lineup, and we apply it to every duct cleaning and sealing job across our Plantation service area. Every crew member arrives background-checked and uniformed, with the price already written down before anyone touches your system.
Styles & brands we work with
Common Trane Air Duct Cleaning Problems We Solve in Plantation
- Pinhole rust and seam separation in original galvanized ductwork. Plantation’s 1970s and 80s ranches often still run the ductwork that came with the house. Decades of humidity and salt air from the Atlantic eat through galvanized steel, opening pinholes that pull attic debris and insulation into your Trane’s airstream.
- Mold accumulation in Trane Hyperion air handlers after thunderstorms. The Hyperion TAM7, TAM8, and TAM9 series sit low in many Plantation homes. When flex ducts east of University Drive hold standing water after heavy rain, mold moves into the evaporator coil and blower wheel within 48 hours.
- Fiberglass duct board shedding on Trane supply plenums. Plantation’s original supply plenums were often built from fiberglass duct board. Over time it breaks down, releasing glass fibers and trapping dirt that restricts airflow to Trane XR and XL outdoor units, which shortens compressor life.
- Clogged blower motors from missing filtration. Many Trane split systems installed during Plantation’s building boom lack proper return-side filtration. Oak pollen and sabal palm debris from the city’s mature tree canopy pack the blower wheel, dropping static pressure until the unit short-cycles.
- Flooded low-lying flex runs after afternoon storms. Slab foundations and poor drainage in older Plantation neighborhoods let water seep into flex ducts. When a Trane system pulls air through that wet flex, it spreads a musty smell through every vent.
Trane Service in Plantation: What Local Conditions Mean for Your Equipment
Here’s the thing most national advice misses: Plantation’s combination of 1970s-era Trane duct layouts and the city’s sprawling old-growth tree canopy means return ducts are often clogged with oak pollen and sabal palm debris, not just household dust. Add the afternoon thunderstorms that roll through from May to October, and the low-lying flex runs east of University Drive can hold standing water that breeds mold inside Trane air handlers within 48 hours. A Trane XR13 in Jacaranda or Plantation Acres isn’t failing because the brand is bad. It’s failing because the air it pulls has spent 40 years passing through trees, humidity, and ductwork that was never built for the moisture load this city throws at it. That changes how the system should be cleaned and sealed, and it’s why we treat every Trane job in Plantation as its own diagnostic problem, not a one-size-fits-all cleaning.
Our crew once crawled into a 1982 ranch on NW 7th Street where a Trane XR14 was short-cycling and our Dryer Vent Cleaning in Plantation revealed the issue. The original galvanized return duct had rusted through near the slab, sucking in attic debris and rodent nesting. We cut out the corroded section, installed a sealed galvanized replacement, and cleaned the Trane blower wheel. Full airflow came back and runtime dropped by a third. That’s the kind of work Plantation’s older Trane systems call for, and it’s what we do.
Trane Models & Products We Service in Plantation
We work on the full Trane residential and light commercial range: the XL Series (XL15i, XL16i, XL18i), the XR Series (XR13, XR14, XR15), Hyperion air handlers (TAM7, TAM8, TAM9), and RunTru by Trane entry-level split systems. When it comes to parts, we use OEM Trane components if you want them or if the part is under a third-party warranty. But we also carry and often recommend high-quality aftermarket alternatives like galvanized steel duct sections and epoxy-coated flex that hold up better in Plantation’s humidity than some original components. Our repair-and-clean-first stance means we only recommend full duct replacement when the ductwork is rusted through or collapsed, which does happen on 50-year-old Trane systems around this city.
See the difference
Before
After
Before
After
Before
AfterTrane Service Pricing in Plantation
Plan on these ranges for Trane duct work in Plantation:
- Air duct cleaning (whole system): $350 – $650 depending on home size and duct condition
- Evaporator coil cleaning on Trane air handler: $150 – $300
- Flex duct repair or section replacement: $200 – $500 per run depending on length and access
- Duct sealing (mastic and mesh): $400 – $900 whole-system
- Full duct replacement (when rusted or collapsed): $3,000 – $7,000 depending on scope
What drives the cost is access, the age of the ductwork, and how much biological growth we find. A free estimate gets you a written price before any work starts, covering exactly what we’ll do and what it costs. No per-vent pricing games. Call (754) 354-3644 and Roy or one of our techs will give you the straight number for your Trane system in Plantation.
Serving Plantation, FL - Our Local Coverage Area
We’re based in the Plantation area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Trane Air Duct Cleaning in Plantation
Because your filter only catches what comes through the return, and mold isn’t coming from outside, it’s growing inside the system. Plantation’s summer humidity, combined with condensation from rapid temperature swings during afternoon thunderstorms, creates the exact conditions mold needs inside low-lying flex ducts and around the evaporator coil of your Trane XR13. A standard filter change never addresses the moisture already inside. Call (754) 354-3644 and we’ll inspect the ductwork and tell you where the growth is starting.
Every three to five years, but in Plantation it depends on the trees. If you’re in a neighborhood with mature oaks or sabal palms dropping pollen and debris, and you have pets, every three years is realistic. The old-growth canopy across much of Plantation means return ducts accumulate oak pollen and palm debris faster than they would in a newer, treeless subdivision. Call us for an inspection and we’ll tell you based on what we see in your specific ductwork.
Yes. We use negative-air machines from Nikro and rotary brush systems from Rotobrush to clean without pressing debris through the system. The Hyperion TAM7, TAM8, and TAM9 air handlers have particular coil designs, and we protect them with proper isolation while the negative-air machine pulls the loosened debris out. Our techs have cleaned hundreds of these units across Plantation without damaging a coil.
Most likely a duct problem, especially in slab-foundation homes east of University Drive in Plantation. Low-lying flex ducts hold standing water after heavy rain, and that water becomes a mold source inside the ductwork within 48 hours. It then gets distributed through every vent when your Trane runs. We’ll trace the musty smell to the flooded run and either dry, seal, or replace the affected section. Call (754) 354-3644 for an exact diagnosis, and estimates are free.
Clean first, replace only if we find rust-through or collapse. Original galvanized ductwork in Plantation’s 1970s homes often has pinhole rust and seam separation, but if it’s structurally sound, a thorough cleaning and mastic sealing can extend its life for years. If we find sections rusted through near the slab, like we did in that NW 7th Street ranch, replacement is the honest call. We never recommend full replacement unless the ductwork has failed. Call (754) 354-3644 and we’ll inspect it and show you exactly what we find with before-and-after photos of your own ducts.
Service Areas Near Plantation
We cover Plantation and the surrounding Broward County communities, including Fort Lauderdale, Sunrise, Margate, Coconut Creek, and Pompano Beach. If you own a Trane system in one of these areas, we can help. For Trane owners east of Plantation, see our Trane service in Fort Lauderdale page. If you’re up toward the beach, check out Trane service in Pompano Beach.
Book Your Trane Service in Plantation Today
Clean ducts move air. Everything else is just noise. If your Trane system in Plantation is short-cycling, musty after storms, or just not moving air like it used to, call (754) 354-3644. We’ll give you a written price before we touch anything, and the 365-Day Done Right Promise covers every job in writing. Roy Castellanos and the Hollis Air Duct Fort Lauderdale crew will show up uniformed, on time, and ready to work.
Written by Roy Castellanos, Owner at Hollis Air Duct Fort Lauderdale, serving Plantation and Broward County since 2004.