Dryer vent cleaning
Whole-home duct cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Abatement Technologies Dryer Vent Cleaning in Fort Lauderdale: What to Know First
Dryer vent cleaning for homes with Abatement Technologies systems in Fort Lauderdale typically runs $89 to $189, and most jobs are finished in under two hours. We’re an independent Abatement Technologies service provider, not a manufacturer-authorized shop, which means we troubleshoot the vent run and the dryer’s exhaust on their own terms rather than reading from a corporate script. If you own a home near Victoria Park, Coral Ridge, or out toward Plantation and your dryer’s taking two cycles to dry a load, call (754) 354-3644 and Roy or someone on his crew will give you a straight answer before you spend a dime.
This page is for Fort Lauderdale homeowners who own Abatement Technologies equipment and need the vent line behind it cleaned, inspected, or rerouted. We’ll tell you what actually fails on these systems in Florida humidity, what it costs, and what we do differently.
Key Takeaways
- Abatement Technologies dryers in Fort Lauderdale clog faster because salt air and 70%+ humidity turn lint into a dense, sticky mat.
- Most vent failures are not the dryer. They’re the termination point: bird screens, old flap dampers, and crushed flex runs behind the appliance.
- We quote one flat price per vent line before work starts, and it’s covered by the 365-Day Done Right Promise.
- We are independent. We are not an authorized Abatement Technologies service provider, and we don’t pretend to be.
How Abatement Technologies Products Fail – and How We Fix Them
Abatement Technologies builds solid equipment. The vent problems we see in Fort Lauderdale are rarely a defect in the machine. They’re what Florida does to the exhaust path. Here are the five failure patterns we walk into most often on Abatement Technologies jobs, and what we do about them.
- Clogged termination screens on external wall caps. Many Abatement Technologies installs route to a wall cap with a wire mesh screen meant to keep birds out. In Fort Lauderdale, that screen collects lint and salt crust within months. We remove the screen, clean the cap, and if you want wildlife protection, we mount a proper bird guard with a flapper that still exhausts freely. The screen is the weak point, not the dryer.
- Crushed or kinked flex duct behind the appliance. The space behind a laundry room in a Fort Lauderdale house is tight. Over time, the flexible transition duct gets pushed against the wall when the dryer shifts, and you lose airflow. That means longer dry cycles and lint piling up inside the run. We inspect the full line, replace crushed sections with rigid metal where the layout allows, and secure everything so it stays put.
- Lint accumulation in interior wall chases with multiple elbows. Some Abatement Technologies exhausting setups, especially in older Fort Lauderdale homes with second-story laundry rooms, run through interior wall cavities with two or three 90-degree elbows. Each bend catches lint. We use a rotary brush system plus negative-air collection so the debris comes out, not into your laundry room. One elbow is manageable. Three elbows deliberately planned is a clog waiting to happen.
- Worn backdraft dampers on roof vent terminations. If your Abatement Technologies dryer vents through the roof, the damper at the termination point takes a beating from Florida sun and afternoon thunderstorms. When it warps or sticks open, humid air pours back down the vent and wet lint clings to the walls of the pipe. We replace the damper assembly and seal the penetration properly. That’s usually a $45 to $85 parts cost on top of the cleaning.
- Gap between the Abatement Technologies unit exhaust and the vent connection. Different Abatement Technologies dryer models have slightly different exhaust outlet positions, and if the appliance was installed by someone who didn’t measure, you get an offset connection with a gap. Lint puffs out behind the machine instead of going through the vent. We rebuild the connection so it seals tight and test airflow before we leave.
Roy Castellanos has cleaned vent lines in condos near the 17th Street Causeway and in single-family homes west of I-95, and the same thing shows up over and over: the dryer is fine. The vent run is the problem. Clean ducts move air. Everything else is just noise.
Styles & brands we work with
Our Abatement Technologies Dryer Vent Cleaning Process
Here’s what a normal Abatement Technologies dryer vent cleaning call looks like from start to finish, so you know exactly what’s happening at your Fort Lauderdale home.
- 1
Call and tell us the setup. You reach a live person at (754) 354-3644. We ask where the dryer sits, where the vent exits, and how long the run is. We give you a written price based on that before any technician shows up.
- 2
We show up inside the window. Uniformed, background-checked, and on time. We lay down drop cloths around the laundry area and take a look at the full run, from the back of the Abatement Technologies unit to the termination point.
- 3
We pull the lint from the entire line. We use a rotary brush system that spins a brush through the pipe while a negative-air collection machine pulls the loosened debris into a sealed container. Nothing gets blown into the house. For rust-free Fort Lauderdale runs, we also run a sanitizing pass if you want it, but we’ll tell you honestly if your line doesn’t need it.
- 4
We check the termination point. Wall cap, roof cap, or soffit vent: we inspect the flapper, screen, bird guard, and seal. If something’s restricted, we replace it at the price we quoted before work started.
- 5
We test the airflow. We turn the Abatement Technologies dryer on and measure airflow at the termination point. You’ll see the flap open and feel the air moving. If the reading’s weak, we find the restriction and fix it.
- 6
We clean up and hand you a written receipt and guarantee. No mess left behind. Every job is covered by the 365-Day Done Right Promise: if the vent fails within a year, we come back and make it right at no charge, including a free second visit. It’s written on the receipt, not in a vague marketing line.
We don’t use hardware store gear. We run professional-grade equipment from Rotobrush and Nikro, and we carry Abatement Technologies-compatible parts when they’re the right call. Same tools commercial crews use, explained in plain terms.
What Abatement Technologies Dryer Vent Cleaning Costs in Fort Lauderdale
Here are the price ranges we actually quote in Fort Lauderdale, in writing, before any work starts. The range covers the majority of homes. The price doesn’t change at the door.
- Standard single-family home, short vent run (under 10 feet, direct exterior wall exit): $89 to $129. Covers full line cleaning, termination inspection, and airflow test.
- Typical Fort Lauderdale home, medium vent run (10 to 25 feet, two to three bends, roof or soffit exit): $129 to $169. Covers the same work with more labor and access equipment.
- Long, complex vent run (over 25 feet, multiple stories, existing clogs or pest intrusion): $169 to $239. We’ll tell you before we start if your line falls into this range based on what you describe, and you’ll get the exact figure in writing.
- Add-on repairs: Bird guard installation $35 to $75, vent cap replacement $45 to $85 when parts are available locally, vent rerouting quoted per foot after we see the layout.
What moves the price in Fort Lauderdale is the length of the run, how many bends it has, how accessible the termination point is, and whether we’re dealing with existing clogs or pest damage. We don’t charge per vent, and we don’t bundle in services you didn’t ask for. Call (754) 354-3644 for a free estimate: describe your laundry room setup and we’ll give you a written range before we schedule.
See the difference
Before
After
Before
After
Before
AfterWhy Fort Lauderdale Homeowners Call Hollis Air Duct Fort Lauderdale for Abatement Technologies Work
Roy Castellanos has been doing HVAC and air duct work across South Florida since before half the local jack-of-all-trades outfits were even licensed. He learned the fundamentals at Los Angeles Trade-Technical College and spent the better part of two decades working on systems from Fort Lauderdale to Port Everglades. He’ll tell you what your Abatement Technologies vent actually needs, not what pads the invoice.
Every job runs on The Garrison Standard: we arrive inside the quoted window, we put the price in writing before we start, we complete the job by the book, and we leave the site cleaner than we found it. The 365-Day Done Right Promise backs all of it in writing. If something fails within a year, we return and fix it at no charge, including a free second visit. No negotiation required.
We also work on vent systems for Lennox, Trane, and Carrier, which means if you have a mixed-brand house or a rental property in Fort Lauderdale with multiple appliance systems, we’re not going to fumble around with equipment we don’t know. One crew, one standard, no surprises.
Our phones are answered by a live person 24 hours a day, 7 days a week. No voicemail loops. No callback queues. You call, a person picks up.
FAQs
No. Cleaning the vent line itself is maintenance on the exhaust path, not on the dryer’s internal components. What can void a warranty is neglecting the vent to the point where the dryer overheats or its thermal fuse fails. We’re independent of Abatement Technologies, so we don’t speak for their warranty department, but we clean vents in a way that protects your warranty coverage: no aggressive chemicals, no cutting into the machine, and photo documentation of the work if you need to show a manufacturer’s rep what was done.
In most cases we can schedule within a few days, and for active vent blockages or a dryer that’s shutting off mid-cycle, we give current availability when you call. We don’t promise same-day service because that’s not how scheduled trade work operates here, and every other company that does is just trying to get a van in your driveway. Call (754) 354-3644 and we’ll give you a real day and time.
Most vent lines in Fort Lauderdale homes can be repaired rather than replaced. A crushed section of flex duct gets swapped for rigid metal, a worn damper gets replaced, a bad screen gets removed and a bird guard installed. Full replacement only makes sense when the existing line is improperly sized, routed through a dangerous path, or so brittle with age that patching it would be throwing good money after bad. We’ll show you the condition of the line and give you a straight recommendation. If we can repair it for $60 and save you a $400 replacement, that’s what we’ll tell you.
Every 12 months for a household that runs the dryer regularly, and every 6 months for vacation rental properties or homes with four or more people doing laundry daily. Fort Lauderdale’s salt air and year-round humidity make lint stick to the vent walls faster than it does in dry climates. If you notice dry times creeping up, a burning smell, or the exterior flap not opening when the dryer runs, call sooner. Those are warning signs, not routine wear.
Yes. Bird guard installation and vent cap replacement are standard parts of our Abatement Technologies vent service. We carry quality-compatible caps and guards, and if you need a specific color or finish to match the exterior of your Fort Lauderdale home, we’ll source it. The wrong cap on a salt-air coast won’t last. We use materials that hold up to Florida sun.
Call Hollis Air Duct Fort Lauderdale for Abatement Technologies Dryer Vent Service
If your Abatement Technologies dryer vent hasn’t been cleaned in the last 12 months, call (754) 354-3644 for a free estimate. You’ll get a live person on the line, a written price before any work begins, and the 365-Day Done Right Promise on the back end. That’s how we run every job in Fort Lauderdale, and it’s the only way Roy Castellanos knows how to do business.
Written by Roy Castellanos, Owner, Hollis Air Duct Fort Lauderdale at Hollis Air Duct Fort Lauderdale, serving Fort Lauderdale and nearby areas.